Free Express Shipping on Orders HK$300+
Skil-Care Cushion Top Vinyl Bed Rail Pads
- Pads extend between and below mattress and bed rails
- Over the top foam padded for comfort and extends 4” over the rail
- Prevents entrapment in rails
- Covered in durable, reinforced, wipe-clean vinyl
- Non-allergenic, mildew resistant, and bacteriostatic
AliMed IQ Duo Plus Fall Alarm
IQ Duo Plus Pull-Cord Alarm, by AliMed, functions as either a magnetic pull-cord alarm or a sensor pad alarm with the flip of a switch. It is compatible with all of AliMed's sensor pad and seatbelt systems. The IQ Duo Plus is protected by ABS plastic and rubber bumpers, making it durable and reliable.
IQ Duo Plus Pull-Cord Alarm features a silent mode that can alert only at the nurses' station when connected to the nurse-call system, ensuring other patients in the room are not disturbed. The hidden reset button prevents patients from trying to reset the alarm, and all settings are concealed under the battery cover for added security.
IQ Duo Plus Pull-Cord Alarm Features and Benefits:
- Use with Pull-Cord or Sensor.
- Use with Chairs or Beds.
- Extra-Long Battery Life.
- Durable - Withstands Patient Abuse.
- Single Concealed Reset Button.
- Chime or Alarm Alert.
- Silent Mode.
PSC Wireless Bed Sensor Pad 12″ x 30″
12″ x 30″ Wireless Bed Sensor Pad is used with the PSC Wireless Patient Monitoring System. The Transmitter (WAT-1) can be removed and interchanged between Wireless Bed and Chair Pads.
- When triggered, the transmitter instantly sends a wireless signal to the alarm monitor without the dangerous delay
- Automatically resets after the patient returns to the bed / chair sensor tray
- The alarm monitor and transmitter communicate every 5 minutes to confirm that both remain synchronized safely
- The monitor may be mounted or placed outside the patient's room at a distance of 150 ft from the transmitter
- The alarm monitor can be mounted with a wall mount
- Latex Free Antimicrobial Rugs
PSC Wireless Chair Sensor Pad 12″x12″
12″ x 12″ Wireless Chair Sensor Pad is used with the PSC Wireless Patient Monitoring System. The Transmitter (WAT-1) can be removed and interchanged between Wireless Bed and Chair Pads.
- When triggered, the transmitter instantly sends a wireless signal to the alarm monitor without the dangerous delay
- Automatically resets after the patient returns to the bed / chair sensor tray
- The alarm monitor and transmitter communicate every 5 minutes to confirm that both remain synchronized safely
- The monitor may be mounted or placed outside the patient's room at a distance of 150 ft from the transmitter
- The alarm monitor can be mounted with a wall mount
- Latex Free Antimicrobial Rugs
Full Length Bed Rail Protectors
Made with Polyurethane Fabric instead of PVC due to risks of Phthalates with PVC. PU is safer & higher quality and serves a longer lifetime.
The Full Length Bed Rail Bumpers are designed to fit onto standard height wooden side rails, providing a safe protection for patients in bed.
Suitable for profiling beds with 2 side rails.
PSC Wireless Patient Monitoring System Set
PSC
Patient Monitoring System offers continuous 2.4G bi-directional wireless
communication. The wireless feature eliminates tripping hazards from cords. The
alarm monitor works with the Secure Wireless Bed or Chair Sensor Pad. The
wireless alarm has a wireless range of 150 feet between the transmitter and the
monitor. Adding the optional Nurse Call Interface Cable (NCI-1) can eliminate
the in-room alarm sound while alerting the nurse’s station.
Low
battery indicator
Sensor
pads are antimicrobial, latex-free and incontinent proof.
Auto
resets when patient returns to sensor pad.
Secure
connection warning light will be on when the monitor to transmitter link is
broken.
Alarm
Monitor (WAM-1) can sync up to three
Transmitters (WAT-1) when multiple bed, chair, or floor mat sensors are needed.
Sensor
pad size:
Bed pad:
76cm (L) x 60cm (W)
Chair
pad: 30cm (L) x 30cm (W)
Medicare Abdominal Restraining Belt
The
Medicare Abdominal Restraining Belt includes an articulated system to let the
patient turn on to either side, sit up, and sit on the bed. This is a common
method for the purpose of Psychiatric restraint. The abdominal belt can be
easily installed before or after the patient has gone to bed. The lower part -
with subjection bands - can be fixed to the bed or stretcher frame; the upper
part has to be placed around the waist of the patient. The lateral restraining
bands must always be applied and used and are intended to prevent the patient
from rotating around the axis of the belt.
Lateral
sewn band - Improves the security by preventing the patient from spinning
around.
Available
to use in different widths of beds.
Reinforced
padded edges - Increases the patient's comfort.
The
eyelet holes are ultrasound sealed and the stainless steel eyelets are highly
resistant to tear.
Size:
Perimeter: 68cm – 108cm (M), 95cm – 135cm (L)
Medicare Wheelchair Seat Protective Belt
The
Medicare Wheelchair Perineal Belt Secures the hold around the patient's waist
and prevents it from sliding down. Appropriate for patients with stable control
of the upper trunk.
Made of
light-weight, highly breathable 3D fabric and an ergonomic design for utmost
patient comfort
Easy to
apply in wheelchair and fully adjustable with slider buckles
Straps
secure with quick-release buckles outside the patient's reach for caregiver
assisted release ultimately patient security
Provides
waist support and crotch strap prevents sliding
Durable
and machine washable
Size:
Perimeter: 90cm – 135cm (M), 115cm – 165cm (L)
Adjustable Hip Protector
The
adjustable hip protector is intended for temporary needs and designed for
active elderly people who are afraid of falling. Ideal for use in
rehabilitation, training centers and sports leisure facilities or at home
during the post-traumatic recovery phase.
The hip
protector can be worn over or under normal clothing as desired, easy to put on
and take off for users and caregivers. Belt made of breathable material for
excellent comfort and washable at 40 ° C.
Size: S
(89-95cm), M (95-105cm), L (105-115cm), XL (115-125cm)
Bedside Bed Rail Support
The Bed
Rail Support is designed to provide additional assistance getting into or out
of bed following hip replacement surgery, a back surgery or other injury. The
Versatile lightweight design works on the left or right side of any bed size
from king to twin. Coated with a nonslip foam, the stability bar and capped
legs ensure the bed rail will not slide or tip for greater safety and security.
Designed
to improve patient safety
Eliminates
entrapment and accidental bed rail injuries
Durable
vinyl covering is mildew-resistant and easy to wipe clean
Thick
padding improves both comfort and protection
Size:
71cm (W) x 52.5cm (D)

